尊龙凯时

Close
010-57374441
Products

Gas Fusion Machine FGC-00

The gas fusion machine FGC-00, developed by Ruishenbao Analytical (Shanghai) Co., Ltd. is a specialized sample preparation equipment for XRF analysis and testing. The process of melt beads for XRF analysis prepared by bead fusion method is as follows: the sample is assisted by a flux(borate: a single or proportional mixture of lithium tetraborate and lithium perborate) and a demolding agent(mostly halides). With the platinum crucible(usually the platinum / gold mass ratio is 95/5) as the heat conduction vessel, the material is melted by high temperature (the temperature is generally between 1050℃ and 1300℃). Finally, The melt glass bead is formed by cooling at the pot bottom directly or by casting. As one of the methods for preparing samples for XRF, the bead fusion method effectively reduces the matrix effect and mineral effect of ore, rock, soil, refractory, metallurgical raw materials, etc. during XRF analysis, greatly improving the accuracy of the analysis. Thus it can be widely used in steel, metallurgical, chemical, Geological, cement, ceramic refractory and other industries. The FGC-00 is a fully automatic 4-station gas fusion machine with compact structure and fast heating speed via gas(propane or butane) as the fuel. It also combines several advantages such as automatic temperature control, good temperature control accuracy, PLC automatic control, and multiple safety protection designs. Superior performance is delivered pleasantly at relatively low cost and ensure safe gas usage. Advantage

The application of advanced design concept of small size and beautiful structure.

The fully automatic four-station design, fast temperature increase by LPG(propane / butane) and a wide range of temperature settings(800-1600℃).

Each station with independent control and display.

Great temperature stability, reproducibility and independent synchronized operation of several stations.

PLC automatic control, high degree of automation, one-button operation to set parameters such as rotation, swing, reverse sample, pause, time and speed.

A hierarchical authorization mechanism(technical engineers and technical experts) to meet the needs of laboratory equipment classification management.

multiple mechanisms ensure the equipment stability and the safety of personnel operations, including the emergency closure, gas leakage closure, overheating protection shutdown, flame control unit locking, temperature sensor flame control and the LED display of the running conditions throughout.

High sample production efficiency, sample quality and stability which meets XRF experimental requirements, and shows pleasant performance/cost ratio.


Security
■ Application area

XRF analysis of samples including ore, rock, soil, refractory, metallurgical raw materials, prepared by bead fusion method. Thus it is typical in sectors such as iron and steel, metallurgical, chemical, Geological, cement, ceramic refractory.

■ Technical parameter

Model

Automatic gas fusion machine

Temperature range

800-1600

Heating stations

4

Heating mode

gas

Gas pressureLPG

50mbar±5mbar

Air pressure

6bar-10bar ,with secondary pressure release valve

Oxygen pressure

2bar±0.1bar, with secondary pressure release valve

Temperature control of flame

independent control

Power

220V, 1-phase, 50/60Hz ,200W

Crucible rocking amplitude and frequency

adjustable

Forming mode

automatic casting and forming

Control system

PLC controlPID intelligent temperature control LED display

Operation mode and time of fusion curve for each phase

preheatoxidizemeltcool ,adjustable time for each phase

Fusion mode

fusion and rockingautomatic casting

Fusion stations

4

Safety protections

gas leakage closure, overheating protection shutdown, flame control unit locking

Net weight

~35kg

DimensionsL×W×H mm

470×470×260



PREV : FMC-01 Silicon molybdenum bar Automated Electric Fusion Machine
Related products
网站地图网站地图
友情链接:兴发娱乐  yp街机  尊龙凯时  币游  k8凯发  尊龙凯时  南宫娱乐  尊龙凯时  28圈  恒峰g22  尊龙凯时  不朽情缘